Guide

Truck Dispatching: How to Match Trucks, Drivers and Shipments

Truck dispatching explained: the checks behind a good assignment, how to rank the trucks that pass them, how to handle delays, and a checklist to work from.

By METHODSS8 min read

Truck dispatching is the daily work of matching shipments to trucks and drivers, so that the goods are collected and delivered on time, by a truck that suits them, with a driver who can finish the job within the working day. With a growing fleet and docks that do not always keep to plan, every assignment becomes a set of checks that are easy to forget. This guide sets out what a dispatcher decides, the checks behind a good assignment, how to rank the trucks that pass them, how to handle exceptions, and where rules-based truck dispatch software helps.

What truck dispatching decides

For each shipment, the dispatcher answers a small number of questions:

  1. Which truck will carry it, and which driver will drive?
  2. When should the truck set off for the pickup?
  3. Will it arrive in time for the customer’s delivery deadline, if there is one?
  4. What happens to the truck afterwards: another job nearby, or a return to the depot?

Around those decisions sit the everyday interruptions of freight dispatch: a shipment added at short notice, a slow pickup, a truck waiting for a dock. A dispatch board helps by showing every shipment by where it stands (waiting for a truck, assigned, under way, delayed or completed) beside the trucks available now. It is where the plan and the exceptions meet.

The checks behind a good assignment

A good assignment is one that will not come back as a problem later in the day. Before confirming one, each of these should hold.

The truck

  • In service. A truck under maintenance or out of service cannot be offered work, however close it is to the pickup.
  • Body fit. The body must suit the goods. Open flatbeds suit goods that can travel uncovered or under tarps and are loaded from the side by crane or forklift, such as steel and building materials; goods that must stay dry and secure need a closed body, such as a dry van. In Majestic Intelligence, flatbeds carry only metal goods and building materials.
  • Capacity in pallets and weight. Both must fit. Dense goods can reach the weight limit with pallet positions to spare, and light, bulky goods can fill every pallet position well below the weight limit.
  • Upcoming planned maintenance. If the truck is booked into the workshop later in the day, the job must be finished before then, or the truck misses its slot.
  • A way there. The truck must be able to reach the pickup, and the pickup and the destination must be joined by a known route.

The driver

  • Licence class. The driver must be licensed for the truck. In the US a tractor-trailer needs a commercial driver’s license of the right class. Majestic Intelligence simplifies this to two classes, articulated and rigid, and an articulated licence also covers rigid trucks.
  • Available. Not on leave and not already on another job.
  • A shift that covers the whole job. The shift must cover not only the delivery but the drive back to the depot. A job that ends two hours from home at the end of the shift is not finished; it has moved the problem to the evening.

Hours-of-service rules are a separate, regulatory matter. In the United States, a property-carrying driver may drive for up to 11 hours within a 14-hour window, with a 30-minute break after 8 hours of driving (49 CFR 395.3), and dispatchers must plan within the rules that apply to them. Majestic Intelligence does not calculate hours of service: its shift is a simplified company rule, a daily working window with no breaks or weekly limits.

Ranking the trucks that can take it

Often several trucks pass every check. Choosing between them by habit, such as the usual driver or the nearest dot on the map, works until it does not. A short, fixed order of questions gives consistent answers and is easy to explain:

How suggested trucks are ranked
OrderQuestionWhy it comes here
1Is the truck suitable?A truck that fails any check is ruled out, and the reason is given
2Which is at the pickup earliest?An early pickup protects the rest of the job, including the delivery
3Does it meet the deadline?Between trucks at the pickup at the same time, the one that delivers in time comes first
4Which is the smallest that fits?It keeps larger trucks free for larger shipments that only they can carry
5Which driver has most shift left?More time in hand when the truck is back at the depot leaves room for the unexpected

The deadline comes after the pickup time because loading and the drive to the destination are the same for every truck, so the earliest at the pickup is usually the earliest at the destination too.

A rule like this will not always choose what an experienced dispatcher would, which is why its reasons should be shown: the dispatcher can then overrule it knowingly. Trucks that cannot take the work should be listed too, each with the reason in words (too heavy, the wrong body, under maintenance, a shift that would not cover the job), so nobody wonders where the obvious truck went.

Handling exceptions on the dispatch board

The dispatcher’s second job is to notice an assignment going wrong while there are still options.

Delays, always with a cause

A delay needs a stated tolerance so that small variations do not raise noise. In Majestic Intelligence a truck is Delayed when it is expected more than 10 minutes after its planned arrival. Delayed is a flag beside the status, not a status of its own: a delayed truck is still In Transit, and both facts matter. A delay without a cause is hard to act on, so each one should say why:

Causes of delay and what the dispatcher can do
CauseWhat it meansWhat the dispatcher can do
TrafficThe road is slower than plannedTell the customer the new time
Late departureThe truck set off, or left the pickup, later than plannedFind out why, and tell the customer if the delivery will slip
Waiting for a dockEvery dock at the facility is busy and the truck waits in the yardCall the site, and warn the destination if the delivery will slip
Late at the pickupThe truck reached the pickup later than planned, and the delivery will follow lateAgree a new time with the customer before the goods leave the pickup

Dock queues

A dock serves one truck at a time, and when every dock is busy, trucks wait in the yard, first come first served. A queue at one facility can delay several jobs at once, so it is worth watching before any single truck is late. Long waits also cost money: across the industry, time at a facility beyond two hours is commonly counted as detention.

Reassigning and cancelling

Sometimes the right answer is a different truck. That is easy before any goods are loaded and hard afterwards, so reassign or cancel before loading starts. In Majestic Intelligence a job can be cancelled while it is assigned, or once the truck has reached the pickup and before loading begins, but not while the truck is driving there. The truck becomes Available where it stands, and the shipment waits for another truck.

When rules-based planned dispatch helps

Much of a carrier’s freight is routine: the same customers, pickups and destinations, day after day. Assigning each of those shipments by hand takes time the dispatcher could spend on exceptions. Planned dispatch hands routine bookings to the best free truck by the same rules a dispatcher would apply, and leaves the unusual work to people. It helps most when:

  • much of the day’s freight is booked in advance and repeats;
  • the checks and the ranking are agreed and written down;
  • the dispatcher can see every automatic assignment and change it;
  • there is a clear way to switch it off.

Why explainable rules beat opaque ones

Software can recommend a truck by rules a person can read, or by a model whose reasoning cannot be inspected. For truck dispatching, readable rules have practical advantages:

  • The dispatcher can check a suggestion in seconds, and disagree with it for a stated reason.
  • New staff learn the company’s reasoning from the suggestions themselves.
  • When something goes wrong, the cause can be found: which check passed that should not have, or which rule put the wrong truck first.
  • The owner can change a rule deliberately, rather than hoping a model picks up the change.
  • Suggestions shown to a person and assignments made automatically follow the same rules, so the two never disagree.

A truck dispatching checklist

Before confirming an assignment, check that:

  1. The truck is in service and not already on a job.
  2. Its body suits the goods (in Majestic Intelligence, a flatbed only for metal goods or building materials).
  3. The shipment fits in both pallet positions and weight.
  4. No planned maintenance falls before the truck is back.
  5. The driver holds the right licence class, is not on leave and is not on another job.
  6. The driver’s shift covers the whole job, including the drive back to the depot.
  7. The job respects the hours-of-service rules that apply to your operation.
  8. The expected arrival meets the customer’s deadline, or the customer has agreed a new time.

Through the day:

  • Watch delayed trucks and their causes, and tell customers early.
  • Watch dock queues at busy facilities.
  • Reassign while a job is only assigned, or once the truck is at the pickup and before loading, if the plan breaks or a better truck comes free.
  • Send trucks with no further work back to the depot.
  • Make sure every delivered shipment’s proof of delivery comes back.

How dispatch works in Majestic Intelligence

Majestic Intelligence, designed and engineered by METHODSS, builds these practices into its truck dispatch software. The Dispatch board sorts every shipment into Unassigned, Assigned, Active, Delayed and Completed, with the trucks available now alongside. Delayed work has its own column, and every delay carries its cause.

When a shipment needs a truck, the suggested trucks are listed best match first, in the order described above, each with its reasons in words. For example:

At the pickup by 10:42 · Meets the deadline · 10 of 14 pallets · 5 h of shift left

Trucks that cannot take the work are listed with the reason. The truck and driver checks described earlier guard every assignment, whether a person makes it or planned dispatch does, including the clash with planned maintenance (see fleet and maintenance).

Planned dispatch gives the scenario’s planned bookings to the best free truck by the same rules, a few minutes after they arrive. There is no machine learning and no hidden weighting, and it can be switched off in Settings. Shipments a person creates are always left for a person. Anything that needs a decision appears in “Needs attention”, described in our guide to the logistics control tower.

The demonstration runs on a simulated carrier, and every truck, driver and shipment in it is fictional. Its dispatch rules are a simplified company model: a shift is a working window, not an hours-of-service calculation, and each job carries one full-truckload shipment from one pickup to one destination. Rates and invoicing, multi-stop and less-than-truckload work, a driver app and integrations with telematics or other systems are not built today; they can be scoped and built by METHODSS as part of a deployment.

Try it on the Dispatch board in the demo, or contact METHODSS to talk about dispatch for your own fleet.

In Majestic Intelligence

Dispatch

A dispatch board by stage, suggested trucks with the reasons in words, and planned dispatch by rules you can read.

Fleet and maintenance

Trucks, drivers and shifts, and maintenance work orders that dispatch respects.

More resources

All resources

See it working

Watch a simulated carrier run its day.

Open the working product: trucks loading, on the road and unloading across California’s Inland Empire. No sign-up; nothing connects to real systems.

Built by METHODSS

Need a custom logistics solution? Let’s build it together.

METHODSS adapts Majestic Intelligence to your fleet, sites and rules and connects it to your data, or designs and builds new logistics software with you.