Product documentation

Majestic Intelligence Demo Guide: A Tour in Ten Minutes

A ten-minute, step-by-step tour of the Majestic Intelligence logistics software demo: dashboard, Live Operations, dispatch, documents, analytics and settings.

By METHODSS8 min read

This guide walks you through the Majestic Intelligence logistics software demo in about ten minutes. The demo is the working application, running in your browser on a simulated trucking operation, with nothing to install and no sign-up. Everything you see is simulated, and everything you change stays in your browser.

Before you start: what you are looking at

Open the demo and you arrive on the Dashboard of Demo Transport Co., a fictional carrier in California’s Inland Empire, around Ontario, Fontana, Riverside and San Bernardino. Its network has nine facilities (a truck depot, five factories, a warehouse, a distribution center and a retail park), with eight trucks, ten drivers and six customers. The facilities are fictional businesses at illustrative real locations; the roads and the satellite imagery are real.

The clock opens at 08:00 on Day 1, a Monday, and it is already running. In the header, the Simulated operations indicator shows the simulated day and time, for example “Day 1 · Mon · 08:00”. It is always visible, as a reminder that no truck on screen is real. At 1× one real second is one simulated minute, so a twelve-hour working day passes in twelve real minutes.

A ten-minute route through the demo
MinutesWhereWhat to do
0Simulated operations indicatorChoose Pause, so the clock waits while you read
0–1DashboardRead “Needs attention”
1–3Live OperationsSwitch views, open the list, select a truck
3–4Simulated operations indicatorLook at the other controls; stay paused or at 1× until you have dispatched
4–6DispatchAssign trucks to SHP-1008 and SHP-1007
6–8Live Operations, Shipments, DocumentsFollow the job and its paperwork
8–9Analytics, Cost OverviewRead the figures
9–10Create menu, SettingsChange something; choose your units and theme

Time matters in this tour. SHP-1008 must reach the Regional Distribution Center by 12:00, four real minutes after the demo opens at 1×, and its job takes about an hour and a half of simulated time from assignment to arrival. So pause first: select the Simulated operations indicator and choose Pause (Step 3 explains the controls), and resume once you have assigned it in Step 4.

Step 1: The Dashboard and “Needs attention”

The Dashboard is the opening screen. Its greeting tells you how many things need a decision. Below it are quick actions (Create job, Add truck, Add facility, Assign driver, View map and Review alerts) and six key figures: Active trucks, Available trucks, Active shipments, Delayed, Upcoming arrivals and Pending pickups. Each figure opens the screen behind it.

Start with the Needs attention panel. Each item says what happened and what to do, with a button that does it. At 08:00 on Day 1 you will find three shipments that need a truck (SHP-1006, plus SHP-1007 and SHP-1008, which the scenario leaves for you) and Truck 08, under maintenance for a brake inspection. All alerts opens the full list on the Alerts screen.

Step 2: Live Operations in the 3D view and on the satellite map

Choose Live Operations in the navigation. It opens on the 3D View: the facilities drawn on a schematic industrial plan, with the trucks moving between them. The switch at the top left changes to the Satellite Map: the same trucks at the same moment, at real coordinates on real roads, their journeys solid when loaded and dashed when empty. A caption at the bottom left says what you are looking at, for example “Simulated positions on a real map — not GPS”.

Then try three things:

  1. Open the list. The List button at the top right opens the operations list, with tabs for Trucks, Shipments, Facilities and Activity, status filters and search. It holds everything the picture shows, as text, and works from the keyboard.
  2. Select a truck in the list or in the picture. Its details open on the right: its status (Heading to Pickup, Loading or In Transit, for example), the ETA and progress, the driver, the shipment, the cargo, the pickup and the destination. Follow keeps a moving truck in view.
  3. Use the controls at the bottom right: zoom, Fit all trucks, Fit all facilities, Reset view and Full screen. On the satellite map, the Map menu chooses the base map (Satellite with labels, Satellite, Road map or Dark map) and the layers to show.

Step 3: Control simulated time

Select the Simulated operations indicator in the header to open the demo controls. They let you run the operation at your own pace:

  • Pause and Resume stop and restart the clock. The Space bar does the same when no field or button has the focus. The clock also pauses by itself while the browser tab is hidden.
  • Speed offers 1×, 2×, 5× and 15×, and the panel says what each means: at 15×, one second is fifteen simulated minutes.
  • Skip to 06:00 jumps straight to the next 06:00, recording the events in between rather than showing them. Use it in the evening, when most trucks are parked.
  • Restart operations goes back to Day 1 at 08:00, keeping your trucks, drivers, customers, facilities and routes; work in progress and history start afresh.
  • Change scenario or reset takes you to Settings (Step 6).

The operation never simply ends: at midnight the next day’s freight is booked and the trucks carry on.

Stay paused, or at 1×, until you have dispatched in Step 4: at faster speeds SHP-1008 can pass its 12:00 deadline before a truck is assigned to it.

Step 4: Dispatch a shipment yourself

Most of the day’s freight is given to trucks by planned dispatch: a few minutes after a booking arrives, it goes to the best free truck by simple rules you can read. On Day 1 the scenario leaves two shipments for you:

  • SHP-1008: urgent machined steel brackets, 12 pallets, from Northgate Steel Works to the Regional Distribution Center, to be delivered by 12:00.
  • SHP-1007: bedroom furniture, 14 pallets, from Westmoor Furniture Factory to Kingsway Retail Park, by 13:30.

Open Dispatch. The board sorts every shipment into five columns: Unassigned, Assigned, Active, Delayed and Completed, with the trucks available now listed above them. Find SHP-1008 under Unassigned and choose Assign truck.

The dialog, “Assign a truck to SHP-1008”, opens with Suggested trucks: up to three suitable trucks, the best match first, each with its reasons in words: when it would be at the pickup, whether it meets the deadline, how many of its pallets the shipment would use and how much of the driver’s shift is left. Under Not suitable now you can see why other trucks were ruled out, for example because a truck is busy, too small or has the wrong body for the goods. The list depends on the moment you open it, because the operation keeps moving.

Choose a truck, check the driver and the Pickup timing, and confirm with Assign truck. The same rules check your choice, and a refusal gives the reason in plain words. Then do the same for SHP-1007.

If you leave them, nothing breaks: at 12:00 SHP-1008, and at 13:30 SHP-1007, appear in “Needs attention” as Deadline missed. From Day 2 the daily copies of these two bookings are planned like the rest, while Day 1’s SHP-1007 and SHP-1008 still wait for you.

Step 5: Follow the job, its paperwork and its figures

Follow the truck

A few minutes after you assign it, the truck sets off for the pickup. Select it in Live Operations to watch it pass through its stages: Heading to Pickup, Arrived at Pickup, Loading, Loaded, In Transit, Arrived at Destination and Unloading, then Available again. On the Dispatch board the shipment moves from Assigned to Active to Completed, and on the Shipments screen its details list each milestone with its simulated time. Set the speed to 5× or 15× if you would rather not wait.

Check the documents

Every delivery job has two documents. The bill of lading is Expected when the truck is assigned and Signed at pickup when the truck leaves with the goods. The proof of delivery is Received when the signed copy comes back with the driver, or Awaiting signed copy if it does not; still not back four simulated hours later, it is Missing. The Documents screen puts the missing ones first. Open a document to read or print it, choose Mark received, or Attach a file: a PDF, PNG, JPEG or WebP scan that stays in your browser. In the default scenario, SHP-1012’s signed copy does not come back with the driver, so by the afternoon of Day 1 there is one to chase. Both documents are explained in bills of lading and proofs of delivery.

Read the figures

Analytics shows Delivered, On-time delivery, Arrived as planned, Average transit, Fleet utilisation and Empty distance for Today, Yesterday or All kept days, with panels on delays, facilities, drivers and lanes, each marked Simulated. The Cost Overview turns the same deliveries into a Revenue estimate, a Cost estimate (fuel, driver and maintenance) and a Contribution before overheads, by customer, by pickup and destination, and by day. Its figures are marked Illustrative because they come from example rates, which you can change with Change the rates. The guide to logistics KPIs for trucking explains what each measure tells an owner.

Step 6: Change the operation and the settings

The Create menu

The Create button in the header offers six choices: Create shipment, Create transport job, Add truck, Add facility, Add customer and Schedule maintenance. A shipment booked without a truck waits on the Dispatch board; with a truck chosen, it becomes a job at once. A new facility is placed by clicking the map. Every change is checked by the same rules the simulation uses, and a refusal says why.

Settings

Settings holds your preferences and the operation’s choices:

  • Appearance: the theme (Light, Dark or As the system) and the amount of motion.
  • Units and time: km · kg or mi · lb, and a 24-hour or 12-hour clock.
  • Operations: switch off Planned dispatch to dispatch every shipment yourself, choose how many days of history to keep (3, 7 or 14), and Export history as a JSON file.
  • Demo and data: switch to another scenario, such as “Inland Empire with simulated roadworks” or the smaller “Four-truck dispatch desk”; restart operations; restore the default scenario; or Reset demo data.

What is saved, and where

The demo keeps a checked copy of the operation and your preferences in this browser’s own storage, on this device, and picks up where you left off on your next visit. Attached files stay in the browser too. Nothing you change is sent to a server or shared with other visitors. Reset demo data in Settings clears everything this browser saved for the demo and returns to the default scenario.

What the demo shows, and what comes next

Everything in the demo is simulated: the company, its trucks, drivers, customers and shipments, every position and every figure. Positions are labelled as simulated, not GPS, and money figures are labelled illustrative. The map imagery and the road network are real.

The demo shows how Majestic Intelligence handles a full day of regional full-truckload work. It does not include rates and invoicing, hours-of-service compliance, multi-stop work, real tracking, a driver app, customer portals or integrations. For your own operation, METHODSS adapts the platform to your network, fleet and rules and connects it to your real data, with sign-in and hosting agreed with you.

Start the tour now in the Majestic Intelligence demo, or contact METHODSS to talk about your operation.

In Majestic Intelligence

Control tower

A dashboard of what needs a decision, and every truck and facility on a satellite map or a 3D view of the operation.

Dispatch

A dispatch board by stage, suggested trucks with the reasons in words, and planned dispatch by rules you can read.

More resources

All resources

See it working

Watch a simulated carrier run its day.

Open the working product: trucks loading, on the road and unloading across California’s Inland Empire. No sign-up; nothing connects to real systems.

Built by METHODSS

Need a custom logistics solution? Let’s build it together.

METHODSS adapts Majestic Intelligence to your fleet, sites and rules and connects it to your data, or designs and builds new logistics software with you.